Page 2
Conversion of Semi Tractor to Toterhome.
Picture of the top frame being fit to top. Hopefully there will be standing room in the cab
with a fold down bunk.
Front view with frame-up.
This item here is a 8 foot square to make sure the cab lines up with the bed.
Frame up done on lay up table.
Top of the cab being made.
Hood being redone. It faded over the years.
Here is the basement being built on the layup table.
Streching the frame about 3 feet. A section of frame from a wrecked International was used
so thing will match.
This is the basement ready to be painted. It is up side down.
This is an area where I had them connect both side so I could get a 8 foot table in the basement.
Or things that are long. Skis, flagpoles, tent poles. etc.
Another view of the streched frame.
Progress is being made.
Slide out and bath in the rear.
Rear deck being made.
Rear view with plate for gooseneck ball and 2 inch reciever hitch.
Another view.